Product Recall Checker: Search Recalls by UPC, Lot Code, Brand or Model

Software problem has the potential for an inaccurate displayed longevity estimate.

Warnings added to the IFU for ultrasound endoscopes and water bottle assembly to ensure there is deaerated sterile water in the assembly prior to and during the procedure.

Nylon suture indicated for use in general soft tissue approximation and/or ligation may have needles with distorted curvature, that may break during use, or could cause additional soft tissue or vessel injury, including tearing or bleeding intraoperatively.

Delayed or no result when analyzing clinical samples with EMAG system (ref: 418591/418591U) due to a randomly occurring software error, Error 10003 Heater timeout after updating to recent firmware SP4 Patch 2

Software problem has the potential for an inaccurate displayed longevity estimate.

Therapy Disc (TD) that powers and sends stimulation signals to an Implantable Pulse Generator (IPG), part of a neurostimulation system, has a firmware issue that causes the TD to attempt to restart, then fail, leading it to become non-functional, and if a secondary TD is unavailable, this may lead IPG to become non-functional, thus unable to inhibit transmission of pain signals.

Due to software issue, X-ray interventional system may experience internal error if F-Store or imagine acquisition is performed while clinical analysis function is use.

Solid-State Drives (SSDs) that are not specified in the Medical Device File may have been installed in various PCs. These SSDs may have different performance characteristics, which may include reduced reliability over time such as loss of imaging functionality or motorized movement, a blank or black display, and/or the inability to store newly acquired images or access previously acquired images.

Solid-State Drives (SSDs) that are not specified in the Medical Device File may have been installed in various PCs. These SSDs may have different performance characteristics, which may include reduced reliability over time such as loss of imaging functionality or motorized movement, a blank or black display, and/or the inability to store newly acquired images or access previously acquired images.

Retrospective review of servicing records identified AIC units requiring various hardware, firmware, and/or software update(s): 1. RFID firmware issue that may result in failure of the AIC to recognize the purge cassette during case setup or cassette change. This issue may result in delay in procedure or therapy. 2. Potential for the rotary push button (RPB) sticking and unreliable actuation impacting operator ability to select and confirm menu entries. This can result in loss of control of the console. 3. Potential AIC instability that could result in AIC start-up failure, inability to drive the pump, and the need for console exchange. 4. Software defect related to calculator process crash, leading to Negative Central Venous Pressure (CVP) values present in Pulmonary Artery Pressure (PAP) calculations.

Retrospective review of servicing records identified AIC units requiring various hardware, firmware, and/or software update(s): 1. RFID firmware issue that may result in failure of the AIC to recognize the purge cassette during case setup or cassette change. This issue may result in delay in procedure or therapy. 2. Potential for the rotary push button (RPB) sticking and unreliable actuation impacting operator ability to select and confirm menu entries. This can result in loss of control of the console. 3. Potential AIC instability that could result in AIC start-up failure, inability to drive the pump, and the need for console exchange. 4. Software defect related to calculator process crash, leading to Negative Central Venous Pressure (CVP) values present in Pulmonary Artery Pressure (PAP) calculations.

Software problem has the potential for an inaccurate displayed longevity estimate.

Due to software issue, X-ray interventional system may experience internal error if F-Store or imagine acquisition is performed while clinical analysis function is use.

Solid-State Drives (SSDs) that are not specified in the Medical Device File may have been installed in various PCs. These SSDs may have different performance characteristics, which may include reduced reliability over time such as loss of imaging functionality or motorized movement, a blank or black display, and/or the inability to store newly acquired images or access previously acquired images.

Retrospective review of servicing records identified AIC units requiring various hardware, firmware, and/or software update(s): 1. RFID firmware issue that may result in failure of the AIC to recognize the purge cassette during case setup or cassette change. This issue may result in delay in procedure or therapy. 2. Potential for the rotary push button (RPB) sticking and unreliable actuation impacting operator ability to select and confirm menu entries. This can result in loss of control of the console. 3. Potential AIC instability that could result in AIC start-up failure, inability to drive the pump, and the need for console exchange. 4. Software defect related to calculator process crash, leading to Negative Central Venous Pressure (CVP) values present in Pulmonary Artery Pressure (PAP) calculations.

Affected leads require additional engineering evaluation due to complaints regarding difficulty in achieving fixation during implantation. Potential harm of tissue trauma due to implant difficulty.

Harley-Davidson Motor Company (Harley-Davidson) is recalling certain 2026 FLHXLSE, FLTRXSTSE, FLHXSTSE, FLHXSE, FLHXL, FLTRXP, FLTRX, FLTRXL, and FLHX motorcycles. The engine control module (ECM) may communicate the incorrect gear position of neutral when the transmission is actually in gear. The motorcycle can experience unintended forward motion, increasing the risk of an injury.

Spencer Manufacturing, Inc. (Spencer) is recalling certain 2026 Rescue, 2025 Initial Attack, and 2024-2025 Pumper emergency vehicles. The display may stop responding to touch commands or fail to power on, preventing the activation of exterior emergency lights, fire fighting and other emergency equipment. A loss of exterior lights can reduce the visibility of the vehicle to other drivers, increasing the risk of a crash. Inoperative equipment can delay emergency response, increasing the risk of injury.

Hyundai Motor America (Hyundai) is recalling certain 2019-2022 Veloster N, 2019-2023 Kona Electric vehicles. A software error in the air bag control unit (ACU) may improperly deactivate the air bag system and seat belt pretensioners. Air bags and seat belt pretensioners that do not activate in a crash increases the risk of injury.

WASHINGTON, Sept. 25, 2026 – Fontanini Foods LLC, a McCook, Ill., establishment, is recalling approximately 2,320 pounds of raw, frozen pork breakfast sausage products that may be contaminated with foreign material, specifically clear, hard plastic, the U.S. Department of Agriculture’s Food Safety and Inspection Service (FSIS) announced today. The raw, frozen pork breakfast sausage items were produced on June 23, 2026. The following products are subject to recall [ view labels ]: 10-lb. cardboard box cases containing “Fontanini PORK SAUSAGE LINKS” with “ITEM 393” printed on the box and “PACKED ON 06/23/2026” printed on the shipping label. The products subject to recall bear establishment number “EST. 6944” inside the USDA mark of inspection printed on the box. These items were shipped to distributors in California, Florida, Michigan, and Nevada to be served in food service establishments, including restaurants. The problem was discovered after the firm received two customer complaints regarding clear, hard plastic found in the sausage product. There have been no confirmed reports of injury or adverse reactions due to consumption of these products. Anyone concerned about an injury should contact a healthcare provider. FSIS is concerned that some product may be in food service and restaurant freezers. Food service establishments and restaurants are urged not to serve this product. These products should be thrown away or returned to the place of purchase. FSIS routinely conducts recall effectiveness checks to verify recalling firms notify theircustomers of the recall and that steps are taken to make certain that the product is no longer available to consumers. If any specific retail locations are identified, a distribution list will be posted on the FSIS website at www.fsis.usda.gov/recalls . Consumers, foodservice operators, and members of the media with questions about the recall can contact Fontanini Foods at [email protected] . Consumers with food safety questions can call the toll-free USDA Meat and Poultry Hotline at 888-MPHotline (888-674-6854) or send a question via email to [email protected] . For consumers that need to report a problem with a meat, poultry, or egg product, the online Electronic Consumer Complaint Monitoring System can be accessed 24 hours a day at https://foodcomplaint.fsis.usda.gov/eCCF/ .

WASHINGTON, Aug. 7, 2026 – Corte Argentino USA LLC, located in Aventura, Fla., is recalling approximately 29,628 pounds of raw beef products that were imported from Argentina without the benefit of import reinspection into the United States, the U.S. Department of Agriculture’s Food Safety and Inspection Service (FSIS) announced today. The raw beef products were produced between May 15, 2026, and May 20, 2026, and have use or freeze-by dates between September 15, 2026, and September 20, 2026. The following products are subject to recall [ view labels ]: Various weight cardboard boxes containing “FrigorIfico Gorina SAIC” boneless beef “Top Sirloin Butt” (“Cuadril Sin Tapa”) Various weight cardboard boxes containing “FrigorIfico Gorina SAIC” boneless beef “Eye Round” (“Peceto”) Various weight cardboard boxes containing “FrigorIfico Gorina SAIC” boneless beef “Topside Cap Off” (“Nalga AD S/Tapa”) Various weight cardboard boxes containing “FrigorIfico Gorina SAIC” boneless beef “Flat” (“Carnaza Cuadrada”) Various weight cardboard boxes containing “FrigorIfico Gorina SAIC” boneless beef “Knuckle” (“Bola de Lomo”) The products subject to the recall bear Argentinian establishment number “EST. N° OF. 2025” and shipping mark “26644-AA” The products were distributed to distributors and retailers in Florida and Texas. The problem was discovered during routine FSIS inspection activities. There have been no confirmed reports of illness or injury due to consumption of these products. Anyone concerned about an illness or injury should contact a healthcare provider. FSIS is concerned that some product may be in consumers’ refrigerators and freezers. Consumers who have purchased these products are urged not to consume them. These products should be thrown away or returned to the place of purchase. FSIS routinely conducts recall effectiveness checks to verify recalling firms notify theircustomers of the recall and that steps are taken to make certain that the product is no longer available to consumers. When available, the retail distribution list(s) will be posted on the FSIS website at www.fsis.usda.gov/recalls . Consumers and members of the media with questions about the recall can contact Eial Kaplun, General Manager, Corte Argentino USA LLC, at 786-350-5805 or [email protected] . Consumers with food safety questions can call the toll-free USDA Meat and Poultry Hotline at 888-MPHotline (888-674-6854) or send a question via email to [email protected] . For consumers that need to report a problem with a meat, poultry, or egg product, the online Electronic Consumer Complaint Monitoring System can be accessed 24 hours a day at https://foodcomplaint.fsis.usda.gov/eCCF/ .

WASHINGTON, JULY 23, 2026 - BCI Foods, Inc., the importer of record located in Saint-Hyacinthe, Quebec, Canada, is recalling approximately 4,300 pounds of a chicken noodle soup product that was imported from Canada without the benefit of import reinspection into the United States, the U.S. Department of Agriculture's Food Safety and Inspection Service (FSIS) announced today. The canned condensed chicken noodle soup product was produced on February 4, 2026. The following product is subject to recall [view labels ]: 10.5-oz can of "tasty KITCHEN Chicken Noodle Condensed Soup PRODUCT OF CANADA" with best by date of "2028 FE 04" and lot code "5 9 2 26 035" The product subject to recall bears Canadian establishment number "EST. 142" printed on the can. This item was further distributed to food banks and food pantry locations in Oklahoma. The problem was discovered when the firm notified FSIS that the canned chicken soup product imported from Canada was not presented for FSIS import reinspection. There have been no confirmed reports of illness or injury due to consumption of these products. Anyone concerned about an illness or injury should contact a healthcare provider. FSIS is concerned that some product may be in consumers' pantries. Consumers who have purchased these products are urged not to consume them. These products should be thrown away or returned to the place of purchase. FSIS routinely conducts recall effectiveness checks to verify recalling firms notify their customers of the recall and that steps are taken to make certain that the product is no longer available to consumers. When available, the retail distribution list(s) will be posted on the FSIS website at www.fsis.usda.gov/recalls . Media and consumers with questions regarding the public health alert can contact Marie-Lou Corbin, Vice President, Sales, BCI Foods, Inc., at 514-218-7143 or [email protected]. Consumers with food safety questions can call the toll-free USDA Meat and Poultry Hotline at 888-MPHotline (888-674-6854) or send a question via email to [email protected] . For consumers that need to report a problem with a meat, poultry, or egg product, the online Electronic Consumer Complaint Monitoring System can be accessed 24 hours a day at https://foodcomplaint.fsis.usda.gov/eCCF/ .

Mack Trucks, Inc. (Mack) is recalling certain 2024-2026 Medium-Duty Electric (MDe) vehicles that were incorrectly manufactured with the hill start assist (HSA) message enabled. A false hill start assist message can lead to unexpected vehicle rollback on an incline, increasing the risk of a crash.

General Motors, LLC (GM) is recalling certain 2023–2027 Cadillac LYRIQ, 2025–2026 model year Cadillac CELESTIQ, 2024–2027 Chevrolet Blazer EV, and 2026-2027 Cadillac VISTIQ vehicles. The brake system control module (BSCM) contains a software defect that may cause a loss of braking during certain driving conditions. A loss of braking ability increases the risk of a crash.

General Motors, LLC (GM) is recalling certain 2025-2026 Chevrolet Express and GMC Savana vehicles. The steering gear assembly may have a nut that was not properly tightened. A loose nut that separates from the steering gear assembly while driving can cause a loss of steering control, increasing the risk of a crash.