Latest Product Recalls Today

Products from the affected device lots were labeled with expiration dates that exceed the true shelf life.

Due to potential for tourniquet cuffs to detach from the bladder at the welding connection and result in the cuff not being able to maintain pressure.

Customers have observed quality control values out of range at the lowest quality control level (QC Level 1) for the PIGF assay which require troubleshooting steps to resolve. If Quality Controls are not performed according to the Instructions for Use, the underestimation of QC1 may go undetected and could contribute to falsely elevated sFlt-1/PlGF ratio results. A falsely elevated sFlt-1/PlGF ratio may result in a higher-risk classification for progression to preeclampsia with severe features potentially leading to intensified clinical monitoring.

Products from the affected device lots were labeled with expiration dates that exceed the true shelf life.

Medline Industries, LP has identified through post-market surveillance a potential risk of the syringe rotating adaptor unwinding during use, which may result in a loose connection and/or full disconnection between the syringe and manifold.

Medline Industries, LP has identified through post-market surveillance a potential risk of the syringe rotating adaptor unwinding during use, which may result in a loose connection and/or full disconnection between the syringe and manifold.

Products from the affected device lots were labeled with expiration dates that exceed the true shelf life.

Products from the affected device lots were labeled with expiration dates that exceed the true shelf life.

Products from the affected device lots were labeled with expiration dates that exceed the true shelf life.

Products from the affected device lots were labeled with expiration dates that exceed the true shelf life.

Medline Industries, LP has identified through post-market surveillance a potential risk of the syringe rotating adaptor unwinding during use, which may result in a loose connection and/or full disconnection between the syringe and manifold.

Medline Industries, LP has identified through post-market surveillance a potential risk of the syringe rotating adaptor unwinding during use, which may result in a loose connection and/or full disconnection between the syringe and manifold.

Medline Industries, LP has identified through post-market surveillance a potential risk of the syringe rotating adaptor unwinding during use, which may result in a loose connection and/or full disconnection between the syringe and manifold.

Medline Industries, LP has identified through post-market surveillance a potential risk of the syringe rotating adaptor unwinding during use, which may result in a loose connection and/or full disconnection between the syringe and manifold.

Products from the affected device lots were labeled with expiration dates that exceed the true shelf life.

Medline Industries, LP has identified through post-market surveillance a potential risk of the syringe rotating adaptor unwinding during use, which may result in a loose connection and/or full disconnection between the syringe and manifold.

Units from one lot were mislabeled with an incorrect part number, identifying the device as a shorter screw length than it physically is.

Volkswagen Group of America, Inc. (Audi) is recalling certain 2019-2023 Audi E-Tron Quattro, 2020-2023 Audi E-Tron Sportback, 2024 Q8 E-Tron, Q8 Sportback E-Tron, SQ8 E-Tron, and SQ8 Sportback E-Tron vehicles. The fastener that connects the brake pedal and the brake booster may have been improperly assembled during manufacturing, which can cause the brake pedal to detach from the brake booster. Brake pedal detachment can cause a loss of brake function and increase the risk of a crash.

Winnebago Industries, Inc. (Winnebago) is recalling certain 2027 Suncruiser and 2026-2027 Sunflyer motorhomes. The side reflectors may not have been installed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Missing reflectors can reduce the visibility of the vehicle to other drivers, increasing the risk of a crash.

Roush Performance Products, Inc. (Roush) is recalling certain 2026 Nissan Frontier Pro4X R vehicles. The cotter pins for the upper control arm ball joint and steering tie rod ends may not have been installed, and fasteners may not be properly tightened. Loose or missing fasteners can cause a loss of vehicle steering and control, increasing the risk of a crash.

Ford Motor Company (Ford) is recalling certain 2025-2026 F-59 and F-53 vehicles. The front axle hub assembly may be missing the spindle nut and cotter pin. A missing spindle nut may lead to brake system damage or wheel detachment, resulting in a loss of vehicle control and increasing the risk of a crash.

Ford Motor Company (Ford) is recalling certain 2021-2025 Bronco vehicles. The transmission to transfer case joint may be misaligned due to an incorrectly performed previous repair, which could lead to wear of the transmission output shaft splines and transfer case input splines. Excessive wear of the transmission and transfer case splines may result in a loss of drive power or vehicle rollaway, increasing the risk of a crash.

Ford Motor Company (Ford) is recalling certain 2015-2017 F-150 vehicles. A loss of signal between the transmission range sensor and the powertrain control module can cause the transmission to unexpectedly downshift into second gear. Unexpectedly downshifting into second gear may result in a loss of vehicle control, increasing the risk of a crash.

Ford Motor Company (Ford) is recalling certain 2024-2026 Ranger vehicles. The sun visor or headliner wiring harnesses may be improperly positioned or have excessive tape thickness, which can result in damaged wires. Damaged wires can create an electrical short and cause a fire in the A-pillar area, increasing the risk of injury or a crash.

Ford Motor Company (Ford) is recalling certain 2025 Maverick and 2026 Bronco Sport vehicles equipped with a 1.5L or 2.0L MPC engine and an engine block heater. The engine block heater may overheat when the vehicle is parked with the block heater plugged in. An overheated engine block heater can increase the risk of a fire.