Latest Product Recalls Today

Due to manufacturing/design issue where the knob on the tracking array may loosen causing potential misalignment of the array.

Due to safety concerns regarding the detachment of the tip of the intrauterine tube (IU tube) that may remain within a patient.

Due to safety concerns regarding the detachment of the tip of the intrauterine tube (IU tube) that may remain within a patient.

Potential for Online Port Errors due to connection issues when connecting the SafeLine of the 5008X CAREset to the substitution fluid port of the 5008X CAREsystem.

Due to safety concerns regarding the detachment of the tip of the intrauterine tube (IU tube) that may remain within a patient.

The potential for intermittent well-to-well bias on the A1c_E assay on the Atellica CH and Atellica CI analyzer which could cause falsely depressed or falsely elevated HbA1c patient results.

Convenience Kits contain Covidien Mon-a-Therm General Purpose Temperature Probes Size 9 Fr. Medtronic has issued a recall of specific production lots of the Covidien Mon-a-Therm general purpose temperature probe-size 9 due to an error in its distribution control process.

Secure Boot was mistakenly not enabled at manufacturing time, which presents a potential cybersecurity risk.

Olympus has developed and released newly designed version of the Distal Cover (MAJ-2315) to replace previous design of the Single Use Distal Covers.

A software anomaly can occur when the pump is paired with the Instinct sensor. Under certain circumstances, the pump unexpectedly stops delivering insulin and displays two error messages back-to-back: Pump Error 53 followed immediately by Pump Error 23. Insulin delivery will stop which may lead to delayed therapy and an increased risk of hyperglycemia or diabetic ketoacidosis (DKA).

A product error defect may cause incorrect bracket placement.

Reduction in the on-board stability of the GSP GALT assay. This may increase the likelihood of run-QC failures and consequently delay the reporting of patient results.

Surgical dressing manufactured out of specification (greater thickness).

Nissan North America, Inc. (Nissan) is recalling certain 2020-2026 Nissan Armada, 2011-2013 Infiniti QX56, and 2014-2027 QX80 vehicles equipped with 22" wheels. The Gross Axle Weight Rating (GAWR) listed on the certification label is incorrect, which can allow the vehicle to be overloaded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims." An overloaded vehicle can increase the risk of a crash.

E-One Incorporated (E-One) is recalling certain 2026 Commercial, 2025-2026 Typhoon N, and Cyclone N emergency vehicles. The drive/pump mode transfer case may disengage, causing loss of power to the rear wheels. Loss of power to the rear wheels can prevent the vehicle from moving, increasing the risk of a crash.

Ford Motor Company (Ford) is recalling certain ITRM accessory kits with part number RL3Z-19H322-AA, ML3Z-19H322-AA, AB, BA, BB, CA, and CB that were sold as aftermarket accessory kits for Ford 2021-2026 F-150 vehicles. The integrated trailer module (ITRM) may lose communication with the vehicle, causing a loss of brake function, turn signals and brake lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, " Lamps, Reflective Devices, and Associated Equipment." A loss of trailer brakes or lights can reduce the driver’s ability to control the trailer and decrease the trailers visibility to other road users, increasing the risk of a crash.

Ford Motor Company (Ford) is recalling certain 2020-2027 Aviator and 2020-2026 Explorer vehicles. The switch for the easy-entry second-row outer seats may bind or stick, resulting in the seats unlatching, tipping, or sliding unexpectedly. A seat that moves unexpectedly may not properly restrain an occupant during a crash, increasing the risk of injury.

Ford Motor Company (Ford) is recalling certain 2016-2019 Explorer vehicles. The roof rail covers may come loose and detach from the vehicle. A detached roof rail cover can create a road hazard, increasing the risk of a crash.

Hyundai Motor America (Hyundai) is recalling certain 2025 Kona Electric and 2026 Kona vehicles. The seat belt buckle in the rear center seat may fail to properly restrain an occupant during a crash. A seat belt buckle that fails to properly restrain an occupant in a crash increases the risk of injury.

Zoox, Inc. (Zoox) is recalling certain Automated Driving Systems (ADS). The ADS software may fail to detect heavy smoke, allowing the vehicle to enter an area of low visibility, particularly active emergency scenes. Failing to respond to low visibility conditions can increase the risk of a crash or impede first responders.

Tenneco Automotive (DRiV) is recalling certain NAPA steering inner tie rod ends, part number 269-3813 sold as replacement parts for 2013-2018 Ford C-Max, 2013-2019 Escape, and 2012-2018 Focus vehicles. The tie rod end stud may separate, causing a loss of steering. A loss of steering increases the risk of a crash.

This recall involves WonderStone-branded Infant Walkers sold in green and pink. The walkers have a gray fabric seat, a white tray with a detachable music box, six wheels, a foot pad and a white hand lever. "Model No: 616" or "Model No: 616-1" is printed on a white label located under the tray.

This recall involves the Moodooy-branded adult portable bed rail. The bed rail has a white frame with black trim and a black storage pocket. The brand name "Moodooy" and model "F311" are printed on the storage pocket. The bed rail is about 12 inches wide by about 21 inches tall to about 23 inches tall (when extended).

This recall involves the Flaunt MagSafe Battery Charger power banks with model number E33A. "FLAUNT" is engraved on the front right side of the power bank and there is a small circular button in the bottom center of the front side of the power bank. The back label of the unit is marked "FLAUNT" and "Model: E33A". The power banks were sold in melon, black, lavender and white. The chargers measure 3 by 2 by 0.25 inches and weigh around 3.2 ounces.

This recall involves BBRKIN and MouTec Biometric Gun Safes with model number QHXP029B. The gray steel safes are used to store firearms and valuables. The safes measure about 14 inches by 12 inches by 57 inches, have one shelf and can store approximately five firearms. The recalled safes have the following serial number range: SQC200034980 - SQC202319171. The serial number is on a label on the lower right corner of the front of the safes. The brand name "MouTec" or "BBRKIN" is on the upper right corner of the front of the safes.