Latest Product Recalls Today

it was found that in versions 1.3.7, 1.4.2, and 1.4.3, the Lock Screen and Limited Access Passcode Screen on the iLet graphical user interface (GUI) include certain icons displayed in the status bar that are active, thereby allowing the user to bypass those screens when those icons on the status bar are pressed, allowing unauthorized access while the device is in Limited Access Mode. A Health Risk associated with Limited access mode includes severe hypoglycemia due to unauthorized access to the iLet if someone were to make unauthorized meal announcements or stopped insulin delivery.

Potential safety issue involving the Mean Aneurysm Flow Amplitude (MAFA) ratio of AneurysmFlow (Interventional Tool). Philips has determined that the MAFA ratio does not provide reliable prognostic information regarding aneurysm occlusion following Flow Diverter Stent treatment, however despite being stated in the IUF, it is being relied on for making clinical decisions.

Increased difficulty in installing the centrifuge bowl onto the centrifuge bowl holder. Improper installation may cause the centrifuge bowl to dislodge, resulting in a broken bowl during the prime cycle or treatment phase, leading to a delay in patient treatment and blood loss.

Due to increased in complaints their is the potential for endoscopic clipping device to malfunction.

Increased rate of out-of-specification endotoxin results.

The potential for repeated frames during HF-OCT pullback when using the Gentuity HF-OCT Console (software version 21.11 to 23.3.13) with the Vis-Rx and Vis-Rx Prime catheters. This correction is intended to ensure that users are fully informed of how to recognize, avoid, and mitigate this condition to maintain accurate longitudinal (length) measurements during OCT imaging.

Products may report incorrect AST results during quality control. Health consequences may include delayed response or the need to change to another antifungal agent if laboratory ignores Quality Control test result.

Due to a manufacturing defect, certain Omnipod 5 Pods from 49 lots have an internal soft cannula tear that results in insulin leaking into the Pod instead of being delivered to the user regardless of basal or bolus delivery. This defect results from damage to the unexposed portion of the soft cannula during manufacturing, which would result in a compromised fluid path. The primary failure mode is pump under-delivery due to loss of insulin to an internal leak; in some cases, the defect may also lead to pump shutoff and cessation of insulin delivery when leaked insulin contacts Pod circuity in a manner that results in an electrical short. Under-delivery of insulin (both basal and bolus insulin) or cessation of insulin put users at risk of hyperglycemia, and complications from acute and chronic hyperglycemia, including dehydration, blurry vision, nausea, vomiting, altered mental status, diabetic ketoacidosis (DKA), hyperglycemic hyperosmolar syndrome (HHS), or even death. Users may require hospitalization or medical intervention to treat severe adverse health consequences. Not all devices with the defect will issue an alarm or alert the user. If there is sufficient leakage of insulin to cause a short in the circuity, the Pod will issue a Hazard Alarm that stops all insulin delivery and alerts the user to replace their Pod. In addition, if a user s glucose is trending high and is not responding to insulin delivery, the system may reach the maximum amount of insulin microboluses allowed by the system and trigger the Automated Delivery Restriction (ADR) alert that tells users to check their blood glucose and take appropriate actions (i.e., ADR is a response to persistent hyperglycemia and maximum automated delivery constraints rather than a direct detection of the leak). The magnitude of under-delivery is unknown and based on multiple factors, including how much insulin is being delivered, whether an alarm and/or alert triggers, whether and when the user recognizes the device defect, the duration of Pod use, and the size of the tear.

An internal component of the actuators in a certain production batch may not meet the required mechanical strength. This could result, in the worst case scenario, in a sudden loss of the actuator's ability to hold the load, leading to rapid and uncontrolled downward movement of the lifting arm.

Devices which did not meet internal quality specifications were inadvertently distributed.

Tesla, Inc. (Tesla) is recalling certain 2024-2026 Cybertruck vehicles equipped with 18-inch steel wheels. The brake rotor stud holes may crack and allow the stud to separate from the wheel hub. Wheel stud separation can cause a loss of vehicle control, increasing the risk of a crash.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025 RAV 4 vehicles. The front seat brackets for the seat rails may be welded improperly. Improperly welded seat brackets can prevent the seat from adequately restraining an occupant during a crash, increasing the risk of injury.

Winnebago Industries, Inc. (Winnebago) is recalling certain 2022-2027 Ekko motorhomes. The touchscreen display may register unintended or phantom inputs and turn on the generator without the operator's knowledge. People in an enclosed space, such as a garage, with a running generator may be at an increased risk of injury or death from carbon monoxide poisoning.

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2025-2026 Taos vehicles. In the event of a rear-end crash, the fuel pressure sensor may dislodge or separate from the fuel tank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 301, "Fuel System Integrity." A fuel tank with a dislodged or separated fuel pressure sensor can leak fuel after a rollover crash, increasing the risk of a fire.

Hyundai Motor America (Hyundai) is recalling certain 2025 Elantra N, 2026 Tucson, Tucson Hybrid, Tucson Plug-In Hybrid Electric (PHEV), and Elantra vehicles. The B-pillar impact sensors may have been misassembled, which can delay air bag deployment. Air bags that do not deploy as intended increase the risk of injury in a crash.

Hexagon Purus Systems USA LLC (Hexagon Purus) is recalling certain 2025-2026 Tern RC8 vehicles. A software error may occur between the digital display cluster and the pressure sensors, causing the system to show the incorrect air brake pressure and falsely indicate a brake system failure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems." A display that does not show accurate information may fail to alert the driver to an actual brake issue, increasing the risk of a crash.

Forest River, Inc. (Forest River) is recalling certain 2026 East to West College Avenue and 2026-2027 Entrada recreational vehicles. The fender may contact and damage the rear tire. A damaged tire may cause a loss of vehicle control, increasing the risk of a crash.

Daimler Trucks North America, LLC (DTNA) is recalling certain 2026-2027 Thomas Built SAF-T-LINER HDX2 school buses. The driver seat belt anchor may have been installed with inadequate hardware. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 210, "Seat Belt Assembly Anchorages." An improperly installed seat belt anchor may fail to properly restrain the driver in a crash, increasing the risk of injury.

Daimler Trucks North America, LLC (DTNA) is recalling certain 2026-2027 Thomas Built SAF-T-LINER HDX2 transit buses. The driver seat belt anchor may have been installed with inadequate hardware. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 210, "Seat Belt Assembly Anchorages." An improperly installed seat belt anchor may fail to properly restrain the driver in a crash, increasing the risk of injury.

Goodyear Tire & Rubber Company (Goodyear) is recalling certain Eagle F1 Supersport tires, sizes 305/30ZR21 and 255/35ZR20. The tire tread may separate. Tread separation increases the risk of a crash.

Blue Bird Bus Company (Blue Bird) is recalling certain 2026 All American transit buses. The retention nuts between the wiper blades and the mounting arms may have been improperly tightened. Loose fasteners may cause the windshield wipers to become inoperative, reducing visibility and increasing the risk of a crash.

Blue Bird Bus Company (Blue Bird) is recalling certain 2026-2027 All American school buses. The retention nuts between the wiper blades and the mounting arms may have been improperly tightened. Loose fasteners may cause the windshield wipers to become inoperative, reducing visibility and increasing the risk of a crash.

Altec Industries, Inc. is recalling certain 2025-2026 Digger Derrick and 2025-2026 Aerial Device vehicles. The front end radar was improperly installed, which may result in improper operation of the Adaptive Cruise Control (ACC) and Active Brake Assist (ABA). While driving, the brakes may activate unexpectedly without the driver's input, increasing the risk of a crash.

Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2021-2024 Land Rover Range Rover Velar and Land Rover Discovery, 2020-2023 Land Rover Range Rover Evoque, 2019-2024 Land Rover Range Rover Sport, 2020-2024 Land Rover Range Rover, 2020 Land Rover Discovery Sport, 2020-2024 Land Rover Defender, 2021-2024 Jaguar F-Pace, and 2021-2022 Jaguar E-Pace mild-hybrid electric vehicles (MHEVs.) The DC-DC converter can fail due to an internal fault in the boost control microchip. A failure of the DC-DC converter will result in a loss of 12-Volt system charging and can lead to complete loss of drive power and exterior lighting. A loss of drive power increases the risk of a crash.

This recall involves LED Finger Beam Lights, model A10-8. The toy comes packaged in a hand-shaped cardboard back with four colors (red, white, blue and green) of light. Each light contains three pre-installed AG3 button cell batteries. The back of the packaging has the model number "A10-8", identification of the distributor and manufacturer, production date and batch number printed on a sticker label.