Latest Product Recalls Today

This recall involves AirClub convertible bassinets which convert into a bedside sleeper. The bassinets come in light grey, beige, and purple colors with quilted padding. "Product Model QX-831" is on a label located on the bottom of the convertible bassinets underneath the mattress pad.

This recall involves defective plastic tip restraint kits (also referred to as furniture straps) manufactured by 4our Kiddies. The recalled tip restraint kits contain two white plastic brackets/mounts (one for connection to furniture and the other for connection to the wall), a white plastic cable zip tie, two different pairs of screws (one longer than the other) and two drywall anchors. The plastic in the brackets/mounts and the cable zip tie can break or degrade over time, which could lead to furniture tipping over if a consumer interacts with furniture that was secured by the recalled product. CPSC testing revealed that the recalled plastic tip restraints failed to meet the requirements of the industry standard for tip restraints. CPSC's Anchor It! website, www.anchorit.gov/, has educational materials available to the public, including important instructions for properly anchoring furniture to prevent tip-overs.

Nissan North America, Inc. (Nissan) is recalling certain 2026 LEAF vehicles. The high voltage battery may have internal damage that can cause a short circuit within the battery module. A short circuit in a high voltage battery module increases the risk of a fire.

Chrysler (FCA US, LLC) is recalling certain 2022-2026 Pacifica and Voyager vehicles. The right and left side curtain air bags may have insufficient pressure retention from improperly sealed seams. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 226, "Ejection Mitigation." Air bags with insufficient pressure retention increase the risk of ejection and injury during a crash.

Chrysler (FCA US, LLC) is recalling certain Mopar side curtain air bags with part numbers 68224526AJ and 68224527AH. The right and left side curtain air bags may have insufficient pressure retention from improperly sealed seams. As such, this equipment fails to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 226, "Ejection Mitigation." Air bags with insufficient pressure retention increase the risk of ejection and injury during a crash.

Gillig, LLC (Gillig) is recalling certain 2023-2024 Low Floor transit buses equipped with Michelin X InCity Grip D rear tires. The rear Gross Axle Weight Rating (GAWR) on the federal placard may exceed the tire load rating. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims - Other Than Passenger Cars." Referencing an incorrect GAWR can lead to unintentionally overloading the rear tires, increasing the risk of a crash.

ABC BUS Inc is recalling certain 1999-2013 Van Hool C2045, 2004-2013 Van Hool T2145, 2013-2022 Van Hool TX45, 2013-2023 Van Hool CX45, and 2016-2022 Van Hool CX35 vehicles. The front entrance door may have the incorrect glaze on the lower curb view window. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 205, "Glazing Materials." The incorrect glaze may reduce the driver's visibility, increasing the risk of a crash.

Lucid USA, Inc. (Lucid) is recalling certain 2025-2026 Gravity vehicles. The lap belt anchor brackets on the second row seats may have insufficient welds, which can cause bracket failure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 207, “Seating Systems” and 210, “Seat Belt Assembly Anchorages.” Seat bracket failure can increase the risk of injury during a crash.

Lucid USA, Inc. (Lucid) is recalling certain 2024-2026 Air vehicles equipped with Pure Rear-Wheel Drive. Improperly secured bolts may allow the half-shaft to disconnect from the drive unit. A disconnected half shaft can result in a loss of drive power, increasing the risk of a crash.

Honda (American Honda Motor Co.) is recalling certain 2025 CB1000SP motorcycles. The fuel feed hose may disconnect from the fuel tank, causing a fuel leak. A fuel leak near the rear tire can increase the risk of a crash or injury. In addition, a fuel leak in the presence of an ignition source increases the risk of a fire.

Drainable large pouch may leak due to manufacturing issue.

There is a potential cybersecurity vulnerability affecting certain versions of Centricity Universal Viewer. User login credentials may be exposed on the local client workstation, which could allow an unauthorized individual to potentially impact system availability and/or manipulate data.

Display screen may unintentionally flicker due to a software issue. Exposure to flickering lights may induce photosensitive seizure activity in susceptible individuals.

It was confirmed that the impacted lot has a higher occurrence of invalid rates when compared to the product Instructions for Use.

There is a potential cybersecurity vulnerability affecting certain versions of Centricity Universal Viewer. User login credentials may be exposed on the local client workstation, which could allow an unauthorized individual to potentially impact system availability and/or manipulate data.

Due to product exhibiting potential to generate either invalid or false negative results.

Cribs sold in the USA are missing two access door warning labels.

Labeling mix-up resulting in the incorrect lot outer packaging of product.

Drainable large pouch may leak due to manufacturing issue.

Drainable large pouch may leak due to manufacturing issue.

After receiving customer complaints, investigations confirmed the presence of a positive bias in D-Dimer measurements throughout the entire analytical range.

There is a potential cybersecurity vulnerability affecting certain versions of Centricity Universal Viewer. User login credentials may be exposed on the local client workstation, which could allow an unauthorized individual to potentially impact system availability and/or manipulate data.

Due to adapter not being properly aligned or locked in place.

A potential issue was identified with the torque strength on the external screws of the MICS3 Angled Sagittal Saw Attachment. These screws, which secure the cover to the Angled Saw Housing, may loosen during use and detach from the attachment.

The Battery Charging Station is an optional dual-bay charger used to charge the Cardiosave IABP Lithium- Ion batteries when they are not being used to operate the IABP. Getinge has identified that a protruding screw in the left battery bay limits full insertion of certain batteries and prevents proper charging. The right bay of the Battery Charging Station is not affected by this issue.