Latest Product Recalls Today

This recall involves Joyreal-branded busy board toys. The children's toys consist of a wooden base that measures about 6.6 inches long by 6 inches wide and have 18 led lights, a power switch, a light brightness knob, a mirror, two keys, an electrical cable and a hand crank to generate power. The Joyreal logo and "POWER" are written on the front of the toy, and "SKU: MX049-3" and "Series no.20250730" are written on the underside of the toy.

This recall involves 10 flexible stick figures in purple, black, red, orange, pink, yellow, bright blue, dark blue, white and green. The stick figures come in solid and transparent colors. Each stick figure has four small magnets, one in each hand and foot. The stick figures come in clear plastic packaging labeled "Grtard."

This recall involves children's high chairs. The gray high chairs have a metal frame, metal legs, a tray and a cushioned seat cover. "BICYSTAR" is printed on the front of the tray and "Model No.: TB-HC6900" on a label stitched to the back of the high chair's seat cover.

General Motors, LLC (GM) is recalling certain 2012–2013 Buick Regal Turbo and GS trim-level vehicles that were sold or ever registered, in Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, or Wisconsin. The rear suspension toe links may have received improper corrosion protection, which can result in rear toe link fracture. Rear toe link fracture can cause a loss of vehicle control, increasing the risk of a crash.

General Motors has decided that certain 2027 Chevrolet Bolt EV, 2025-2026 Cadillac OPTIQ, Chevrolet Colorado, Equinox EV, GMC Canyon, 2026 Buick Enclave, Envision, Cadillac CT5, Escalade, Escalade ESV, Escalade IQ, Escalade IQL, LYRIQ, VISTIQ, Chevrolet Blazer EV, Corvette Convertible, Corvette Coupe, Corvette Convertible E-Ray, Equinox, Silverado 1500, 2500, 3500, Silverado EV, Suburban 1500, Tahoe, Traverse, GMC Acadia, Hummer EV Pickup, Hummer EV SUV, Sierra 1500, 2500, 3500, Sierra EV, Terrain, Yukon, and Yukon XL vehicles. The radio may not have been set to the correct status to download the electronic owner's manual during production. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, “Occupant Protection.” Without an owner's manual to consult, owners may not know how to safely use and operate the vehicle, increasing the risk of injury in a crash.

BMW of North America, LLC (BMW) is recalling one 2026 S 1000 RR motorcycle. The turn signal reset button can be unintentionally activated at the same time as the turn signal, resulting in an inoperative turn signal. As such, this vehicle fails to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment." Turn signals that fail to activate as intended increase the risk of a crash.

International Motors, LLC (International) is recalling certain 2023-2027 IC Bus CESB school buses. The brake lines may have been installed with incorrect hardware, which can result in brake line damage and cause a leak. A brake fluid leak can extend the distance required to stop, increasing the risk of a crash.

Honda (American Honda Motor Co.) is recalling certain 2024 Acura ZDX and Prologue vehicles. Due to a software error, the instrument panel display may fail. Additionally, a software error may cause the rearview camera to display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 101, "Control and Displays," 111, "Rear Visibility," and 305, "Electric-Powered Vehicles." An instrument panel display that fails to show critical safety information, such as the speedometer or warning lights, increases the risk of a crash or injury. Additionally, the loss of the rearview camera image can reduce the driver's rear visibility, increasing the risk of a crash or injury.

Firm is initiating a removal due to continued reports of adverse events.

Firm is initiating a removal due to continued reports of adverse events.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Firm is initiating a removal due to continued reports of adverse events.

Firm is initiating a removal due to continued reports of adverse events.

Firm is initiating a removal due to continued reports of adverse events.

Products were mislabeled as the 6mm product but included the 5 mm product.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.