Latest Product Recalls Today

During the device phase of Roadmap Pro, a user may experience a dark image that is not clinically usable. The dark image may result after the user performs a pedal tap (shortly touching the footswitch pedal without generating an Xray image). The pedal tap may cause a dark image with the next fluoroscopy run.

Supplier changes resulted in a fit issue with the Contrast Flow Control Valve (CFCV) interface on the Avanta Injector System. Multiple customer reports indicate that the stopcock cannot be reliably engaged with the CFCV snap interface. In instances where engagement is achieved through applied force, the connection is unstable, and the stopcock may disengage before or during contrast injection, leading to procedure interruption.

Fingerprint scanner may overheat to a temperature to cause 1st degree burn.

This is a sub-recall of a product recall from Huons Co, Ltd., the manufacturer of Bupivacaine Hydrochloride in Dextrose Injection, USP. The recall is due to quality issues identified during an FDA manufacturing facility inspection, citing specific quality deficiencies related to acceptance testing.

B. Braun was notified by our supplier, Ferndale Laboratories, Inc., the manufacturer of MASTISOL¿ Liquid Adhesive, that they have issued a voluntary recall due to potential cracking of the butyrate tubing (outside tube), which renders the product unusable.

The Atlan anesthesia workstation either indicated a failure of the piston ventilator before use or suffered a failure of the mechanical ventilation during use.

Temperature probe devices lack FDA clearance.

These procedure kits contain Bupivacaine Hydrochloride in Dextrose Injection, USP. The manufacturer of the Bupivacaine, Huon Co, Ltd., has issued a voluntary recall due to potential quality issues identified during a recent FDA manufacturing facility inspection.

This is a sub-recall of a product recall from Huons Co, Ltd., the manufacturer of Bupivacaine Hydrochloride in Dextrose Injection, USP. The recall is due to quality issues identified during an FDA manufacturing facility inspection, citing specific quality deficiencies related to acceptance testing.

During the device phase of Roadmap Pro, a user may experience a dark image that is not clinically usable. The dark image may result after the user performs a pedal tap (shortly touching the footswitch pedal without generating an Xray image). The pedal tap may cause a dark image with the next fluoroscopy run.

B. Braun was notified by our supplier, Ferndale Laboratories, Inc., the manufacturer of MASTISOL¿ Liquid Adhesive, that they have issued a voluntary recall due to potential cracking of the butyrate tubing (outside tube), which renders the product unusable.

Denago EV is recalling certain 2024-2025 Nomad, 2024-2026 Nomad XL, 2026 Scout 2, 2026 Scout 4, 2024-2026 Rover XL, 2024-2026 Rover XXL, and 2024-2026 Rover XL6 vehicles. The vehicles may fail to make pedestrian warning sounds when in motion. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 141, "Minimum Sound Requirements for Hybrid and Electric Vehicles." A vehicle that does not emit sound may fail to alert pedestrians of a moving vehicle, increasing the risk of a crash or injury.

Ford Motor Company (Ford) is recalling certain 2012-2018 Focus vehicles previously repaired incorrectly under recall number 18V735. The Canister Purge Valve (CPV) may malfunction, causing the engine to stall unexpectedly while driving. An engine that stalls while driving increases the risk of a crash.

Ford Motor Company (Ford) is recalling certain 2017 F-150 vehicles previously repaired incorrectly under recall number 17V053. The instrument cluster may lose power after initial vehicle start-up in cold ambient temperatures. Several gauges, including the transmission gear position indicator, may not illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 102, "Transmission Shift Lever Sequence, Starter Interlock, and Transmission Braking Effect." An instrument cluster that fails to display critical safety information, such as gear position or warning lights, increases the risk of a crash or injury.

Ford Motor Company (Ford) is recalling certain 2024 Explorer vehicles equipped with a 2.3L engine and 10R60 automatic transmission. An unintentional powertrain control module (PCM) reset may occur while the vehicle is in motion and result in park system damage. A park system that is damaged may not shift into "PARK," resulting in a vehicle rollaway and increasing the risk of injury or crash.

Ford Motor Company (Ford) is recalling certain 2019 Ford Mustang, Lincoln Nautilus, and Lincoln Navigator vehicles previously repaired incorrectly under recall number 19V076. At vehicle start-up, the Instrument Panel Cluster Assembly (IPC) may not function, showing a blank display. As a result, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Controls and Displays." A blank instrument cluster that fails to display critical safety information, such as vehicle speed or safety system warnings, increases the risk of a crash.

Ford Motor Company (Ford) is recalling certain 2018-2020 F-150 vehicles previously repaired incorrectly under recall number 20V097. When the headlight switch is turned from "Autolamps" to "Headlamps On," the Daytime Running Lamps (DRLs) may remain fully bright instead of dimming to parking lamps as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices and Associated Equipment." Daytime Running Lamps that do not dim may reduce the visibility of other drivers, increasing the risk of a crash.

Ford Motor Company (Ford) is recalling certain 2018 F-150 vehicles previously repaired incorrectly under recall number 17V669. Quickly moving the shift lever from Park to Drive may cause a loss of gear indication on the instrument cluster display and a momentary selection of an unintended gear, such as Reverse or Neutral. Unintended gear selection may cause the vehicle to move in an unexpected direction, increasing the risk of crash or injury.

Ford Motor Company (Ford) is recalling certain 2019 Lincoln Nautilus vehicles previously repaired incorrectly under recall number 19V031. The lane center assist system may not adequately detect if a driver has their hands off the steering wheel for a prolonged period of time. Failure to alert the driver with the intended hands-off the wheel warnings may increase the risk of a crash.

Vermeer Manufacturing Company (Vermeer) is recalling certain 2002-2026 BC1800XL brush chipper trailers. The hydraulic jack may extend unexpectedly. An extended jack may contact the ground while driving, causing a loss of vehicle control and increasing the risk of injury or a crash.

Ford Motor Company (Ford) is recalling certain model year 2014 F-150 vehicles previously repaired incorrectly under recall number 24V444. A loss of signal between the transmission output shaft speed sensor and the powertrain control module (PCM) can cause the transmission to unexpectedly downshift into first gear. Unexpectedly downshifting into first gear may result in a loss of vehicle control, increasing the risk of a crash.

This recall involves all SUNS International SS6291 Solenoid Interlock switches used in residential elevators produced from August 20, 2024, through November 6, 2025, with date codes 2431 through 2543. The SUNS SS6291 interlock switch measures approximately 10 inches by 2 inches and weighs about 2-pounds. "SUNS", the model number and date code are printed on a label on the side of the product.

This recall involves Broqixin-branded pool drain covers. The white plastic pool drain covers measure about 7.36 inches in diameter and weigh about 3.84 ounces and come with two screws. "Model 11064W" is printed on the product's packaging.

This recall involves Little Grape Land Nursing Pillows. The nursing pillows are U-shaped and come in a rose floral, alligator, bear, butterfly, cactus, construction truck, forest deer, green leaves, little bunny, spring flower and woodland animal patterns. There are no markings or labels on the product.

This recall involves Crenlux-branded pool drain covers. The white plastic pool drain covers measure about eight inches in diameter and weigh about 12.7 ounces. "Crenlux" is printed on the product's packaging.