Product Recall Checker: Search Recalls by UPC, Lot Code, Brand or Model

Winnebago Industries, Inc. (Winnebago) is recalling certain 2026-2027 Revel and Revel Sport recreational vehicles. The tire information label states an incorrect tire. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims." Referencing the incorrect information could cause owners to install the wrong size replacement tires, increasing the risk of a crash.

Marion Body Works Inc. (Marion Body Works) is recalling certain Waltco MDV series liftgates installed on Morgan aluminum dry vans. The deck pins may break, resulting in the liftgate platform falling. A liftgate that falls unexpectedly increases the risk of injury.

Altec industries, Inc. is recalling certain 2014-2026 AT Series Aerial Device vehicles. The transmission park interlock may be missing, allowing the aerial device to operate while the chassis is not in park. An aerial device that operates while the vehicle is in gear or neutral can cause unexpected vehicle movement and increase the risk of injury.

Kawasaki Motors Corp., U.S.A. (Kawasaki) is recalling certain 2025-2026 W230 motorcycles. The turn signal light bulbs may contain foreign material or have cracks, resulting in light bulb failure. A front or rear turn signal that does not illuminate to indicate the rider's direction of travel increases the risk of a crash.

Daimler Trucks North America, LLC (DTNA) is recalling certain 2027 Thomas Built SAF-T-LINER HDX2 school buses. Front and mid-body interior joints may have been manufactured incorrectly, resulting in insufficient joint strength. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 221, "School Bus Body Joint Strength." A school bus with insufficient joint strength may not adequately protect passengers in a crash, increasing the risk of injury.

Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2020-2026 Land Rover Defender, 2021-2026 Discovery, and 2022-2026 Range Rover vehicles. The driver’s air bag clockspring connector may corrode, which can cause the air bag not to deploy as intended. An air bag that does not deploy as intended increases the risk of injury in a crash.

This recall involves Model Year 2019-2025 UMAX Bistro and Bistro Deluxe gas and electric vehicles. The gas models are J0G (YUM2A) with serial number 0000104-0601120. The electric models are J5D (YUM2E) with serial number 0000116-0000230. The food and merchandise service vehicles have a four-lid ice chest, sliding snack tray, and a vertical display case (Bistro Deluxe) with slanted shelves for displaying goods. The units were sold in white, green, red, teal, and brown colors. The serial number can be located under the rear cargo area, on the frame of the unit. Yamaha is written on the sides and on the front and back of the vehicle.

This recall involves model year 2021-2022 Yamaha Drive2 Electric Fleet Golf Cars. The golf cars were sold in mica (gold), arctic drift (blue), moonstone (gray), carbon (dark gray), bluestone, garnet (red), emerald (green), sunstone (yellow) and glacier (white). The serial number is located underneath the seat, on the frame of the unit. Yamaha will provide assistance if you can't locate the serial number. MODEL YEAR MODEL NAME 2021 JOJ Drive2 AC-L 2022 JOJ Drive2 AC-L 2022 J5B Drive2 AC-L Li

This recall involves Timechee Changing Table Dressers. The recalled dressers are made of wood and were sold in white. The dresser has five drawers and two shelves, and a two-section changing table top. It measures 47.2 inches long, by 19.5 inches wide, by 36.1 inches tall and weighs 160 pounds. The dresser comes packaged in a cardboard box with "KF200066US-01XN-003" printed on the side.

This recall involves defective plastic tip restraint kits (also referred to as furniture straps) that were included in Childcraft furniture sold by School Specialty. The furniture included two plastic tip restraint kits in the box along with the product, with installation instructions. There is a label on the bottom of the furniture with the item number. Furniture that included the defective tip restraint kits is listed below along with the item number. The recalled tip restraint kits contain two white plastic brackets/mounts (one for connection to furniture and the other for connection to the wall), a white plastic cable zip tie, two different pairs of screws (one longer than the other) and two drywall anchors. CPSC's Anchor It! website, https://www.anchorit.gov/, has educational materials available to the public, including important instructions for properly anchoring furniture to prevent tip-overs.

This recall involves Nimood branded adult portable bed rails, models C3 Pro, C4 Pro, C5 Pro, and C5 Pro 2.0 sold for use on adult beds. The model numbers may be found on the assembly instructions, if kept. The C3 Pro bed support railing is made of white metal tubing with a rounded black foam rubber grip handle, and includes a fabric pouch, black strap, and a detachable adjustable magnetic motion light bar. The C3 Pro has two support legs and measures 16.7 inches wide, 26 inches long, and has an adjustable height between 28.9 to 44.9 inches. The C4 Pro bed support railing is made of black metal tubing with a rounded black foam rubber grip handle, and includes a fabric pouch, black strap, and a detachable adjustable magnetic motion light bar. The C4 Pro has two support legs with an adjustable height between 30.3 to 43.2 inches, an adjustable width between 26.4 to 35.8 inches, and an adjustable length between 25.2 and 32.9 inches. The C5 Pro bed support railing has a foldable frame made of black metal tubing with a rounded black foam rubber grip handle, and includes a fabric pouch, black strap, and a detachable adjustable magnetic motion light bar. The bed support railing has a foldable frame made of black metal and black foam padding on the grip handle. The C5 Pro has two support legs with an adjustable height between 29.5 to 42.4 inches, an adjustable width between 26 to 35.8 inches, and a length of 24.4 inches. The C5 Pro 2.0 bed support railing has a foldable frame made of black metal tubing with a rounded black foam rubber grip handle, and includes a fabric pouch, black strap, and a detachable adjustable motion light that is attached by Velcro. The bed support railing has a foldable frame made of black metal and black foam padding on the grip handle. The C5 Pro 2.0 has two support legs with an adjustable height between 30.3 to 40.3 inches, an adjustable width between 28.3 to 34.3 inches, and a length of 25.2 inches.

This recall involves the Merkury Innovations Hot + Cool Heating and Cooling Fan, a portable hot-and-cool bladeless fan and heater with model number MI-DHC02. The model number MI-DHC02 can be found on a white label on the bottom of the product and on the packaging. The fan heater is approximately 13 inches tall, 5 inches wide and 5 inches deep and weighs about 2 pounds.

This recall involves LiKee Pull String teething toys. The teething toys consist of an off-white disc shape with a blue ball in the center and six multi-colored, silicone tentacle-looking pull strings that run through the ball. The disc has three soft push buttons. The brand name and "Baby Sensory Toy" are printed on the front of the product packaging and "Model No. LK-FDWJ" on the back.

This recall involves Model Year 2026 Kawasaki Teryx4 H2 and Teryx5 H2 recreational off-road vehicles with the following model numbers: KRT1000D, KRT1000F and KRT1000G. Each unit has a unique VIN number located on the right rear of the main frame underneath the rear fender and above the rear wheel. The vehicles have either "Teryx4 H2" or "Teryx5 H2" on the driver and front passenger doors and the Kawasaki logo on both the left and right side above the rear wheels. The recalled vehicles were sold in lime green color. Model numbers are printed on the owner's manual.

This recall involves Sloosh dive sticks, contained in packages of Sloosh water toys, model 40041. The model number 40041 is printed on the back of the box of Sloosh water toys, next to the bar code and printed on top of one end of the dive stick, along with Joyin's name and tracking information. The Sloosh water toys package contains 30 pieces, including five dive sticks. The recalled dive sticks are made of hard plastic and are cylinder-shaped. Each stick measures approximately 7-inches in length and about 1-inch or less in diameter. They come in various colors and are packaged in a box with other pool diving toys in the Sloosh water toys package. Only the dive sticks with model 40041 contained in the Sloosh water toys sold prior to October 23, 2025, are being recalled. Consumers can continue to use the other items contained in the Sloosh water toys package.

This recall involves certain Kitchen HQ brand thermal insulated bowls with detachable-hinged lids. The bowls, which were sold in a variety of colors, have a metal interior and a plastic exterior with the words “KITCHEN HQ” written across the front. Affected models include the 10-cup bowl (SKN 817800), the pair of 10.5-cup and 2-cup bowls sold as a set (SKN 884907), and the 10.4-cup, 6-cup, and 2-cup bowls sold as a set of three (SKN 900600).

This recall involves Houoto 642-2150V Pool Drain Covers that are sold for use in swimming pools. The drain covers measure 7-5/8 inches in diameter and the screw hole spacing is 7 inches. They are white and made of ABS plastic. The brand and model number can be found on the product's order receipt.

This recall involves Hopelight adult portable bed rails. The bed rail comes in silver and black, measure 11.5 inches wide by 23.5 inches tall, is made of metal and weighs 4 pounds. It has the model number, F311, printed on the product's packaging.

This recall involves Kidisle-branded hot and iced coffee machines. The single-serve coffeemaker is designed with black, white and gray colors, measures about 11 inches high and 6 inches wide, and has a 50-ounce detachable water tank. The coffeemakers can brew 6 to 14 ounces of cupped or ground coffee. Model "KC101B" is printed on a sticker on the coffeemakers' underside and the brand name on the product order receipt.

This recall involves Arctic Zone Titan Pro 40 can-capacity, iceless coolers. The rectangular coolers were sold in black and brown and have a built?in bottle opener. The zipperless coolers are collapsible and measure about 15 inches wide, 12 inches deep and 12 inches high when open. The coolers have a hard-top lid with a front latch, a front insulated compartment with a front zippered pocket, two mesh side pockets, a shoulder strap with pad and grab handles. "Titan Pro by Arctic Zone" is printed on the front of the coolers and style number 10006348 is on a sewn-in label inside the front zippered pocket.

This recall involves The Black Sheep Fam Kids' Unisex Jogger Pajama Sets and Girls' Sleepshirts. The recalled pajamas were sold in various children's sizes, colors and prints. Sizes include 2T, 3T, 4T, XS, SM, M and L. The size and "Black Sheep Fam Kids" are printed the neck label of the pajamas. The Girls' Sleepshirts have "Made in China" and "96% polyester 4% spandex" printed on the sewn-in side seam label. The Kids' Jogger Pajama sets have "RN# 169608" "Made in Guatemala" and "95% cotton 5% spandex" printed on the sewn-in side seam label.

This recall involves Hasuit 7-Drawer Dressers. The recalled dressers have seven drawers, are made of wood and come in black. They are 27.6 inches wide, 44.5 inches tall, 15.8 inches long and weigh 102 pounds. SKU: AJ-DJ502571_1" is printed on the products packaging (box).

International Motors, LLC (International) is recalling certain 2026-2027 HV vehicles. The service brake may take longer than expected to release. As such, these vehicles may fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems." A delayed brake release can increase the risk of crash.

Great Dane Trailers (Great Dane) is recalling certain 2026 Champion dry van trailers. The deck pins may break, resulting in the liftgate platform falling. A liftgate that falls unexpectedly increases the risk of injury.

Altec Industries (Altec) is recalling certain 2024-2026 AC Series Crane vehicles. The inside joints between the side plates and the base plates of the 26-foot insulating personnel jib (IJ26) may be missing welds. Missing welds can lead to platform joint failure due to fatigue or overload, resulting in the platform falling from the boom tip, increasing the risk of injury.