To check a BlendJet 2 for the U.S. recall, look for the serial number on the underside of its motor base. The first four digits help you screen the unit, and the full serial is needed for confirmation. If yours is affected, stop using it. The U.S. Consumer Product Safety Commission (CPSC) says BlendJet Inc. went out of business, the recall replacement has ended, and recalled blenders should be discarded. Its update is dated May 13, 2025. Official CPSC notice 24-069.
Check the serial number on your BlendJet 2
Start with the blender you physically have. A box or email might identify the shopping transaction, while the motor base identifies the unit you are checking. This matters if you bought a bundle, received the blender as a gift, or swapped parts after the original purchase. Keep the device switched off and read the markings without pressing its controls.
Find the label on the motor base
Look underneath the base for the serial alongside the words blendjet2 and The Original Portable Blender. CPSC shows this location in its recall photos. The blenders came in many colors and designs. Compare the markings on the base first, because the color or pattern you remember seeing on the retailer's page may be shared by many units.
Copy the full sequence exactly or take a clear photo for your own records. When you have two bases, record each serial separately and note which base it came from. If the label is worn, try using better lighting or looking at a photo of the underside. Keep an unreadable label marked as unresolved and set the unit aside while you seek guidance. Guessing a digit could put an unrelated unit through the check. CPSC product and label photos.
Use the first four digits to screen, then check the complete serial
CPSC describes 5201 through 5542 as the prefix range to investigate. A unit within that interval may be affected. Enter its entire serial number in the checker reached from the agency notice through BlendJet's Safety & Recall page. The old manufacturer instructions say that some units within the prefix range fall outside this recall. Checking only four digits leaves those cases unresolved, and a close match to another person's serial has the same problem. CPSC-linked BlendJet serial-check page.
If the lookup fails to load, returns no clear result, or rejects a number you copied carefully, keep the blender out of use while you follow up. Save a photo of the label and the recall number so you can describe the exact unit when asking CPSC for guidance. When the serial falls outside the screening interval, use the official notice to check the model and number again. An unmatched result speaks to this notice's scope and tells you little about a separate fault or damage on the device you own.
What the updated recall tells owners to do
The original U.S. recall was announced December 28, 2023 as notice 24-069. Its scope was approximately 4.8 million U.S. BlendJet 2 portable blenders, with another approximately 117,000 sold in Canada. CPSC identifies two hazards. A blender can overheat or catch fire, and a blade can break off and cause a cut. The remedy field now directs owners to dispose of recalled units. Use the remedy text on the official notice, including the dated update near the top of the page. CPSC recall details.
The agency lists about 329 reports of blades breaking while the blender was in use and another 17 reports of overheating or fire. The notice also records about 49 reported minor burns and one reported laceration. The incident totals describe reports the firm received. They do not tell you whether an individual blender will fail on its next use. An affected unit that appears to work normally still calls for the same stop-use action. There is no need to start it or try a short blend to confirm either hazard.
If you bought or received the unit in Canada, consult the separate Health Canada notice for local information. The Canadian notice also says the original remedy ended and directs owners to discard affected blenders. Anyone dealing with a unit purchased elsewhere should match the same kind of label information against the notice for that market before relying on instructions about a remedy or disposal. Health Canada notice.
Put the disposal instruction into practice
Keep a confirmed recalled unit out of use and follow CPSC's direction to discard it. Keep it out of resale and donation channels, including neighborhood giveaway groups. A person receiving the blender secondhand may have neither the original packaging nor the purchase notice and may have no way to see the reason it was put aside.
Because the blender is rechargeable, ask your city or county waste program how it accepts recalled appliances that contain a battery. Explain that this is a recalled BlendJet 2 with the battery inside its base. Ask the program which drop-off site accepts the whole unit and what it wants you to do before transport. Keep the base intact while you check those directions. EPA's battery guidance explains why the appropriate route can depend on whether a battery is embedded and on what a facility accepts. EPA guidance on batteries in devices.
Why the older pages still show a replacement
In 2023, the manufacturer offered a replacement base under the recall. Its global notice also described a matching lid, and the registration pages highlighted the exchange. Those pages can still come up in search, alongside videos and older news stories that describe the same offer. CPSC's own notice even retains a historical photograph about the exchange. Read the date and the remedy box when you see one of those pages. The May 2025 update is the part of the U.S. notice that tells owners of an affected blender what to do now. Former manufacturer's original notice and current CPSC remedy.
Think of the serial check and the old exchange as two separate tasks. The checker is the identification route cited in the CPSC scope description. The exchange depended on the company's program and its ability to deliver a replacement. Going to the serial check from the agency notice can help identify the product, but the text you see after that click may include old instructions about the program. For a confirmed unit, use the agency's current disposal guidance even if the other page still displays a place to open or track a request.
If you previously registered and never received a base, save the original confirmation with its date and status. Look for a separate shipping confirmation and a delivery record before treating your old case as fulfilled. For an earlier shipment that did arrive, check the serial on the base you use today and keep the label on the old device in its own record. The details about whether a request was acknowledged, shipped, or delivered help you explain what happened when you follow up.
A shopper who already disposed of the affected base may have only a photo of the label and the confirmation email. Keep those files with the order record so you can describe the old unit accurately if a retailer asks. If the old unit is still in your possession, set it aside and make any label photo you need while it remains off. The official direction for the physical blender applies regardless of how far a previous exchange progressed.
What to check if you bought your blender from a retailer
CPSC names Costco, Walmart, Target, other stores, and BlendJet.com as sales channels. The notice gives October 2020 through November 2023 as the sales period for the affected products. Those clues can help you find an older transaction or determine which family member bought it. A purchase from one of those stores during that period still requires an exact-unit check. CPSC distribution details.
Start with the seller in the order history if the product arrived through a marketplace. Note whether the retailer or a third party actually sold it. If you received the blender as a gift, the person who ordered it may have the online invoice and any notice the store sent. You can identify your base using its serial even while you look for the older order.
Keep the purchase record and the recall match together
Write down the retailer name, purchase date when known, and product description from the order. Separately record the model marking, recall number and complete serial from the physical blender. Keep any earlier registration or shipping email with those records. Share personal information only through the verified retailer or government channel that requests it.
With a two-pack, the transaction and the number of affected bases are separate pieces of information. One entry in a Costco account may describe the bundle. Check both bases independently and note which serial goes with which device before bringing a question to member services. If one item is gone, use only the photos or paperwork you actually have for it. Describing the missing evidence helps a retailer tell you which details it can verify.
Use the retailer’s current contact route
Use Costco's recall archive and member support, Walmart's company recall page, or Target's product safety contact to ask about your particular order. State that you are checking a purchase covered by CPSC notice 24-069 and that the federal notice says the maker's original replacement program has ended. Ask what, if anything, the retailer can do for the order today and what records it would need. Costco recall archive, Walmart recalls, and Target product safety support.
Keep the disposal decision anchored to the CPSC notice while you make that inquiry. If you already discarded the unit, tell the retailer before discussing how to document the purchase. If you still have it and someone offers a return, confirm the store's instructions before taking or sending a recalled rechargeable appliance anywhere. A listing in a retailer archive documents a notice, and any separate accommodation depends on what the retailer verifies for your order.
Where to report a safety incident and check a case update
If your blender overheated, smoked, broke, or injured someone, you can file a consumer product safety report with CPSC. The agency directs consumers to SaferProducts.gov and identifies 800-638-2772 as its consumer hotline. In an emergency, attend to the immediate danger or injury first. You can document the incident after you have reached safety. Stop using the blender and rely on details you already observed. SaferProducts.gov incident reporting and CPSC consumer reporting guidance.
Start a record with the date, what happened, and which product was involved. Include the model and serial when you can read them safely, the seller if known, and the official recall number if you have confirmed a match. Describe what you saw, such as smoke during charging or a piece of the blade coming loose during normal use. Photos you already have can help show the affected part or the model label. Keep unavailable details marked as unknown. A clear, limited account of the event lets the agency distinguish what you observed from what you later read online.
A report is also an option if you see a recalled product advertised for sale. CPSC's guidance asks for a link and a screenshot of the exact listing where possible. A photo showing only a color and a generic BlendJet description might leave the model or serial unresolved. Describe the evidence you actually have. For example, say where the listing appeared, whether it identifies the model, and whether the seller shows a serial label. This information can help the agency evaluate the listing without requiring you to buy or test the item. CPSC guidance on online listings.
Search results about a class action can concern a specific docket with its own timeline. In Rittenhouse v. BlendJet, Inc., case 2:23-cv-01906-WBS-SCR in the U.S. District Court for the Eastern District of California, an order dated October 7, 2026 granted the plaintiffs' voluntary dismissal, dismissed their claims against BlendJet Inc. without prejudice, and directed the clerk to close the case. Use the docket number and signed date to identify that update. Its scope is that named lawsuit. CPSC's May 2025 notice remains the source for the manufacturer's recall remedy. District court order, Document 108.
For a household with more than one base, finish the check for each one before combining records or clearing out spare parts. Use the official scope to establish which serials are affected, the latest remedy update to decide what happens to a confirmed recalled unit, and the reporting route to pass on a safety incident. Product Recall Checker is an independent information site. Use the agency notice for the official scope and remedy. Browse consumer product recalls or search household recall notices.
Comments
Comments are reviewed before publication. Do not post personal information, serial numbers, medical details, or emergency reports. For urgent safety concerns, use the official agency contact in the recall notice.
Sign in with Google to leave a comment
Loading comments...